View LBE67C_1091619.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lb e67c, lv e67c, lt e67c power topled ? enhanced optical power led (aton ? ) vorl ? ufige daten / preliminary data 2002-07-17 1 besondere merkmale ? geh ? usetyp: wei ? es p-lcc-4 geh ? use besonderheit des bauteils: mehr licht durch erh ? hten optischen wirkungsgrad; h ? here umgebungstemperatur bei gleichem strom im vergleich zur topled ? m ? glich wellenl ? nge: 469 nm (blau), 503 nm (verde), 525 nm (true green) abstrahlwinkel: lambertscher strahler (120 ) technologie: ingan optischer wirkungsgrad: 3 lm/w (blau), 10 lm/w (verde), 13 lm/w (true green) gruppierungsparameter: lichtst ? rke, wellenl ? nge verarbeitungsmethode: f r alle smt-best cktechniken geeignet l ? tmethode: ir reflow l ? ten und wellenl ? ten (ttw) vorbehandlung: nach jedec level 2 gurtung: 8 mm gurt mit 2000/rolle, ? 180 mm oder 8000/rolle, ? 330 mm esd-festigkeit: esd-sicher bis 2 kv nach eos/esd-5.1-1993 anwendungen ampelanwendung (verde) hinterleuchtung (lcd, schalter, tasten, displays, werbebeleuchtung, allgemeinbeleuchtung) innenbeleuchtung im automobilbereich (z.b. instrumentenbeleuchtung, u. ? .) ersatz von kleinst-gl hlampen markierungsbeleuchtung (z.b. stufen, fluchtwege, u. ? .) signal- und symbolleuchten scanner features package: white p-lcc-4 package feature of the device: more light due to higher optical efficiency; higher ambient temperature at the same current possible compared to topled ? wavelength: 469 nm (blue), 503 nm (verde), 525 nm (true green) viewing angle: lambertian emitter (120 ) technology: ingan optical efficiency: 3 lm/w (blue), 10 lm/w (verde), 13 lm/w (true green) grouping parameter: luminous intensity, wavelength assembly methods: suitable for all smt assembly methods soldering methods: ir reflow soldering and ttw soldering preconditioning: acc. to jedec level 2 taping: 8 mm tape with 2000/reel, ? 180 mm or 8000/reel, ? 330 mm esd-withstand voltage: up to 2 kv acc. to eos/esd-5.1-1993 applications traffic lights (verde) backlighting (lcd, switches, keys, displays, illuminated advertising, general lighting) interior automotive lighting (e.g. dashboard backlighting, etc.) substitution of micro incandescent lamps marker lights (e.g. steps, exit ways, etc.) signal and symbol luminaire scanners
2002-07-17 2 lb e67c, lv e67c, lt e67c anm.: -35 gesamter farbbereich, lieferung in einzelgruppen (siehe seite 5 ) die standardlieferform von serientypen beinhaltet eine untere bzw. eine obere familiengruppe, die aus nur 3 bzw. 4 halbgruppen besteht. einzelne halbgruppen sind nicht erh?ltlich. in einer verpackungseinheit / gurt ist immer nur eine halbgruppe enthalten. note: -35 total color tolerance range, delivery in single groups (please see page 5 ) the standard shipping format for serial types includes a lower or upper family group of 3 or 4 individual groups. individual half groups are not available. no packing unit / tape ever contains more than one luminous intensity half group. typ type emissions- farbe color of emission farbe der lichtaustritts- fl ? che color of the light emitting area lichtst ? rke luminous intensity i f = 30 ma i v (mcd) lichtstrom luminous flux i f = 30 ma v (mlm) bestellnummer ordering code lb e67c-p2q2-35 lb e67c-q2s1-35 blue colorless clear 56 ... 112 90 ... 224 250 (typ.) 470 (typ.) q62703-q6235 q62703-q6236 lv e67c-s2t2-35 lv e67c-t2v1-35 verde colorless clear 224 ... 450 355 ... 900 1000 (typ.) 1900 (typ.) q62703-q6286 q65110-a0185 lt e67c-s2t2-35 lt e67c-t2v1-35 true green colorless clear 224 ... 450 355 ... 900 1000 (typ.) 1900 (typ.) q65110-a0273 q65110-a0274
lb e67c, lv e67c, lt e67c 2002-07-17 3 grenzwerte maximum ratings bezeichnung parameter symbol symbol werte values einheit unit lb lv, lt betriebstemperatur operating temperature range t op ? 40 ? + 100 c lagertemperatur storage temperature range t stg ? 40 ? + 100 c sperrschichttemperatur junction temperature t j + 110 + 125 c durchlassstrom forward current i f 30 ma sto ? strom surge current t 10 s, d = 0.005 i fm 200 250 ma sperrspannung reverse voltage v r 5v leistungsaufnahme power consumption p tot 140 mw w ? rmewiderstand thermal resistance sperrschicht/umgebung junction/ambient sperrschicht/l ? tpad junction/solder point montage auf pc-board fr 4 (padgr ?? e 16 mm 2 ) mounted on pc board fr 4 (pad size 16 mm 2 ) r th ja r th js 350 180 k/w k/w
2002-07-17 4 lb e67c, lv e67c, lt e67c kennwerte ( t a = 25 c) characteristics bezeichnung parameter symbol symbol werte values einheit unit lb lv lt wellenl ? nge des emittierten lichtes (typ.) wavelength at peak emission i f = 30 ma peak 464 501 520 nm dominantwellenl ? nge 1) (typ.) dominant wavelength i f = 30 ma dom 469 ?6 503 ?6 525 ?9 nm spektrale bandbreite bei 50 % i rel max (typ.) spectral bandwidth at 50 % i rel max i f = 30 ma ? 25 30 33 nm abstrahlwinkel bei 50 % i v (vollwinkel) (typ.) viewing angle at 50 % i v 2 ? 120 120 120 grad deg. durchlassspannung 2) (typ.) forward voltage (max.) i f = 30 ma v f v f 4.1 4.6 3.8 4.6 3.8 4.6 v v sperrstrom (typ.) reverse current (max.) v r = 5 v i r i r 0.01 10 0.01 10 0.01 10 a a temperaturkoeffizient von peak (typ.) temperature coefficient of peak i f = 30 ma; ? 10 c t 100 c tc peak 0.05 0.03 0.04 nm/k temperaturkoeffizient von dom (typ.) temperature coefficient of dom i f = 30 ma; ? 10 c t 100 c tc dom 0.04 0.02 0.03 nm/k temperaturkoeffizient von v f (typ.) temperature coefficient of v f i f = 30 ma; ? 10 c t 100 c tc v ? 3.1 ? 3.2 ? 3.6 mv/k optischer wirkungsgrad (typ.) optical efficiency i f = 30 ma opt 31013lm/w 1) wellenl ? ngengruppen werden mit einer stromeinpr ? gedauer von 25 ms und einer genauigkeit von 1 nm ermittelt. wavelength groups are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. 2) spannungswerte werden mit einer stromeinpr ? gedauer von 1 ms und einer genauigkeit von 0,1 v ermittelt. voltages are tested at a current pulse duration of 1 ms and a tolerance of ?.1 v.
lb e67c, lv e67c, lt e67c 2002-07-17 5 helligkeitswerte werden mit einer stromeinpr ? gedauer von 25 ms und einer genauigkeit von 11% ermittelt. luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of 11%. 1) wellenl ? ngengruppen / wavelength groups gruppe group blue verde true green einheit unit min. max. min. max. min. max. 3 463 467 497 501 516 522 nm 4 467 471 501 505 522 528 nm 5 471 475 505 509 528 534 nm helligkeits-gruppierungsschema luminous intensity groups lichtgruppe luminous intensity group lichtst ? rke luminous intensity i v (mcd) lichtstrom luminous flux v (mlm) p2 q1 q2 r1 r2 s1 s2 t1 t2 u1 u2 v1 56 ? 71 71 ? 90 90 ? 112 112 ? 140 140 ? 180 180 ? 224 224 ? 280 280 ? 355 355 ? 450 450 ? 560 560 ? 710 710 ? 900 190 (typ.) 240 (typ.) 300 (typ.) 380 (typ.) 480 (typ.) 600 (typ.) 760 (typ.) 950 (typ.) 1200 (typ.) 1500 (typ.) 1900 (typ.) 2400 (typ.) gruppenbezeichnung auf etikett group name on label beispiel: s2-3 example: s2-3 lichtgruppe luminous intensity group halbgruppe half group wellenl ? nge wavelength s23
2002-07-17 6 lb e67c, lv e67c, lt e67c relative spektrale emission i rel = f ( ), t a = 25 c, i f = 30 ma relative spectral emission v( ) = spektrale augenempfindlichkeit standard eye response curve abstrahlcharakteristik i rel = f ( ? ) radiation characteristic 0 400 true green 550 450 500 600 650 nm 700 ohl00492 i 20 40 60 80 % 100 rel verde blue v 0 0.2 0.4 1.0 0.8 0.6 ? 1.0 0.8 0.6 0.4 0? 10? 20? 40? 30? ohl01660 50? 60? 70? 80? 90? 100? 0? 20? 40? 60? 80? 100? 120?
lb e67c, lv e67c, lt e67c 2002-07-17 7 durchlassstrom i f = f ( v f ) forward current t a = 25 c maximal zul ? ssiger durchlassstrom i f = f ( t ) max. permissible forward current relative lichtst ? rke i v / i v(30 ma) = f ( i f ) relative luminous intensity t a = 25 c maximal zul ? ssiger durchlassstrom i f = f ( t ) max. permissible forward current v ohl01619 1.5 verde, 10 -3 10 -2 10 -1 10 0 10 1 ma 10 2 i f 2.5 3.5 4.5 5.5 v 6.5 true green blue f ohl01488 0 i f t 0 5 10 15 20 25 30 35 40 ma 50 a t temp. ambient 20 40 60 80 ? c 100 estimated average degradation = -50% v ? i 5000 h 10000 h mttf mttf -1 10 -2 10 10 10 -3 -2 10 2 1 0 -1 10 10 i f 10 ma 0 10 v i v (30 ma) i 1 10 ohl00036 verde true green blue ohl11489 0 i f t 0 t temp. solder point s 20 80 40 60 ? c 100 ma 5 10 15 20 25 30 35 s > 5000 h > 10000 h
lb e67c, lv e67c, lt e67c 2002-07-17 8 relative lichtst ? rke i v / i v(25 c) = f ( t a ) relative luminous intensity i f = 30 ma dominante wellenl ? nge dom = f ( i f ) dominant wavelength lv , t a = 25 c dominante wellenl ? nge dom = f ( i f ) dominant wavelength lb , t a = 25 c dominante wellenl ? nge dom = f ( i f ) dominant wavelength lt , t a = 25 c ohl01637 -20 0 v(25 ? c) a t 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 20 40 60 ? c 100 i v i ohl10198 498 dom 0 ma nm 20 40 60 80 120 500 502 504 506 508 510 512 i ohl10196 467 dom 0 ma nm 20 40 60 80 120 468 469 470 471 472 473 474 i ohl00199 521 dom 0 f 10 20 30 40 ma 50 523 525 527 529 531 533 535 537 nm 541 true green 539
lb e67c, lv e67c, lt e67c 2002-07-17 9 zul ? ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t a = 25 c lb zul ? ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t a = 25 c lt / lv zul ? ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t a = 85 c lb zul ? ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t a = 85 c lt / lv ohl01578 10 -5 f i t p t = d p t t p t f i 0.005 0.01 0.02 0.05 d = 10 -4 10 -3 10 -2 10 -1 10 0 10 1 0 a 2 10 s 0.5 0.2 0.05 0.10 0.15 0.20 0.30 0.1 0.25 ohl01583 10 -5 f i p t t p t f i 0.005 0.01 0.02 0.05 d = 10 -4 10 -3 10 -2 10 -1 10 0 10 1 0 a 2 10 s 0.5 0.05 0.10 0.15 0.20 0.30 0.2 0.1 d = t t p 0.25 ohl01579 10 -5 f i t p t = d p t t p t f i 0.005 0.01 0.02 0.05 0.1 d = 10 -4 10 -3 10 -2 10 -1 10 0 10 1 0 a 2 10 s 0.5 0.05 0.10 0.15 0.20 0.30 0.2 0.25 ohl01584 10 -5 f i t p t = d p t t f i 0.005 0.01 0.02 0.05 d = 10 -4 10 -3 10 -2 10 -1 10 0 10 1 0 a 2 10 s 0.5 0.05 0.10 0.15 0.20 0.30 0.2 0.1 0.25
2002-07-17 10 lb e67c, lv e67c, lt e67c ma ? zeichnung package outlines ma e werden wie folgt angegeben: mm (inch) / dimensions are specified as follows: mm (inch). gewicht / approx. weight: 31 mg marking package 4 ? 1 gply6991 ac c c 0.8 (0.031) 0.6 (0.024) 2.6 (0.102) 2.1 (0.083) 2.3 (0.091) 3.0 (0.118) 3.4 (0.134) 3.0 (0.118) (2.4 (0.094)) 0.5 (0.020) 1.1 (0.043) 3.7 (0.146) 3.3 (0.130) 0.12 (0.005) 0.18 (0.007) 0.1 (0.004) typ 0.4 (0.016) 0.6 (0.024) 0.9 (0.035) 0.7 (0.028) 2.1 (0.083) 1.7 (0.067)
lb e67c, lv e67c, lt e67c 2002-07-17 11 l ? tbedingungen vorbehandlung nach jedec level 2 soldering conditions preconditioning acc. to jedec level 2 ir-reflow l ? tprofil (nach ipc 9501) ir reflow soldering profile (acc. to ipc 9501) ohly0597 0 0 50 100 150 200 250 50 100 150 200 250 300 t t ? c s 240-245 ? c 10-40 s 183 ? c 120 to 180 s defined for preconditioning: up to 6 k/s ramp-down rate up to 6 k/s ramp-up rate up to 6 k/s defined for preconditioning: 2-3 k/s
2002-07-17 12 lb e67c, lv e67c, lt e67c wellenl ? ten (ttw) (nach cecc 00802) ttw soldering (acc. to cecc 00802) ohly0598 0 0 50 100 150 200 250 50 100 150 200 250 300 t t c s 235 c 10 s c ... 260 1. welle 1. wave 2. welle 2. wave 5 k/s 2 k/s ca 200 k/s cc ... 130 100 2 k/s zwangsk ? hlung forced cooling normalkurve standard curve grenzkurven limit curves
lb e67c, lv e67c, lt e67c 2002-07-17 13 empfohlenes l ? tpaddesign ir reflow l ? ten recommended solder pad ir reflow soldering ma e werden wie folgt angegeben: mm (inch) / dimensions are specified as follows: mm (inch). ohlpy439 padgeometrie f ? r verbesserte w ? rmeableitung improved heat dissipation paddesign for l ? tstoplack solder resist 1.1 (0.043) 4.5 (0.177) 1.5 (0.059) 2.6 (0.102) 3.3 (0.130) 0.5 (0.020) 7.5 (0.295) 0.4 (0.016) cathode marking kathoden markierung / cu fl ? che / 12 mm per pad 2 cu-area _ < 3.3 (0.130)
2002-07-17 14 lb e67c, lv e67c, lt e67c empfohlenes l ? tpaddesign wellenl ? ten (ttw) recommended solder pad ttw soldering ma e werden wie folgt angegeben: mm (inch) / dimensions are specified as follows: mm (inch). gurtung / polarit ? t und lage verpackungseinheit 2000/rolle, 180 mm oder 8000/rolle, 330 mm method of taping / polarity and orientation packing unit 2000/reel, 180 mm or 8000/reel, 330 mm ma e werden wie folgt angegeben: mm (inch) / dimensions are specified as follows: mm (inch). ohay0583 6.1 (0.240) 2.8 (0.110) 2 (0.079) 3 (0.118) 6 (0.236) 3.5 (0.138) 1.5 (0.059) 2 (0.079) 3.5 (0.138) 1 (0.039) 8 (0.315) 2.8 (0.110) 0.5 (0.020) 7.5 (0.295) solder resist l ? tstoplack pcb-direction bewegungsrichtung der platine 2 (0.079) padgeometrie f ? r improved heat dissipation verbesserte w ? rmeableitung paddesign for 2 cu fl ? che / > 12 mm per pad cu-area ohay0536 c c c a 4 (0.157) 2.9 (0.114) 1.5 (0.059) 4 (0.157) 3.6 (0.142) 3.5 (0.138) 2 (0.079) 1.75 (0.069) 8 (0.315)
lb e67c, lv e67c, lt e67c 2002-07-17 15 published by osram opto semiconductors gmbh & co. ohg wernerwerkstrasse 2, d-93049 regensburg ? all rights reserved. attention please! the information describes the type of component and shall not be considered as assured characteristics. terms of delivery and rights to change design reserved. due to technical requirements components may contain dangerous substances. for information on the types in question please contact our sales organization. if printed or downloaded, please find the latest version in the internet. packing please use the recycling operators known to you. we can also help you get in touch with your nearest sales office. by agreement we will take packing material back, if it is sorted. you must bear the costs of transport. for packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. components used in life-support devices or systems must be expressly authorized for such purpose! critical components 1 may only be used in life-support devices or systems 2 with the express written approval of osram os. 1 a critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. if they fail, it is reasonable to assume that the health of the user may be endangered. revision history: 2002-07-17 date of change previous version: 2002-07-02 page subjects (major changes since last revision) 4 value (forward voltage) 7 diagram ohl01569/01570 to ohl01488/11489 8 diagram ohl01620/01627/01621 to ohl10196/10198/00199 2 wavelength grouping for blue, true green and verde 2 brightness grouping for lv e63c 2002-07-17

▲Up To Search▲

Price & Availability of LBE67C

	To Download LBE67C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .